Label Navigation
Auto Parts
Product Content
The front grille is a mesh part of the front part of a car. It is usually designed in the center of the front face of the car or directly in front of the engine compartment. It is also called "car net" or "front face big mouth". It is located between the front bumper and the front beam of the body, and has an important influence on the resistance of the engine compartment, accounting for about 10% of the overall resistance.
隐藏域元素占位
The SMC(Sheet Molding Compound) front mask is a body part made of SMC composite material.
隐藏域元素占位
The DCPD (dicyclopentadiene) process is a material used in the manufacture of roof members, and its advantages include high strength, high rigidity, high impact resistance, low density, etc. This material has good thermal stability, can maintain its performance at high temperatures, but also has excellent processing properties, can meet a variety of complex manufacturing requirements.
隐藏域元素占位
A heavy truck shroud, also commonly referred to as an air deflector or a fuel-saving shroud, is an air deflector installed primarily on top of the cab of a cargo or tractor truck. Its main function is to reduce the air resistance encountered by trucks at high speeds, thereby reducing fuel consumption, improving vehicle production efficiency and improving performance.
隐藏域元素占位
FRP(Fiberglass Reinforced Plastic, glass fiber reinforced plastic) process car body rear wall is a kind of car body part made of glass fiber reinforced plastic. This material has the advantages of light weight, high strength and corrosion resistance, so it is widely used in automobile manufacturing.
隐藏域元素占位
Square Bale Machine-Body Exterior Trim
RTM(Resin Transfer Molding) process is a molding process for the production of glass fiber reinforced plastic composite materials, which is widely used in the production of automotive exterior parts. The process uses closed mold molding technology, the fiber reinforced material and resin are injected into the mold under high pressure, and after the process of infiltration, polymerization and curing, the final high-strength, lightweight composite products are obtained.
隐藏域元素占位
Rectangular rubber blanking cap
Rectangular rubber cover is a common rubber product, usually made of natural rubber or synthetic rubber.
隐藏域元素占位
Parts rubber pad is usually made of rubber, silicone and other materials, with cushioning, shock absorption, sealing, dust and other functions.
隐藏域元素占位
Interior molding process carpet is a kind of automobile carpet produced by molding process. This kind of carpet is usually made of fiber fabric and foamed plastic, and its appearance and performance are similar to traditional hand-woven carpets.
隐藏域元素占位
News content
What are the glass steel enclosure uses?
Glass fiber reinforced plastic (FRP) is a kind of polymer material with rapid development trend in the past 50 years. 70% of the output of glass fiber is used to manufacture glass fiber reinforced plastic. FRP has high strength and is much lighter than stainless steel plate. It can be used as a car fuel tank and pipe on a jet plane to reduce the net weight of the airport.
隐藏域元素占位
The role of glass fiber reinforced plastic composites in new energy vehicles
In the new energy automobile industry, glass fiber reinforced plastic composite material is gradually becoming an important material. Its light weight, corrosion resistance and high strength make it the choice of many automobile manufacturers. This article will explore the role of FRP composite materials in new energy vehicles and explain why it is of great significance to the automotive industry.
隐藏域元素占位
Design and process analysis of bus DCPD bumper
With the development of lightweight, green and intelligent passenger cars, traditional PP injection molded double-layer structure plastic bumpers have been criticized for high mold costs, materials that cannot be recycled, and it is not easy to carry electrical parts. Large, poor appearance and other reasons were eliminated. Therefore, the research and development of new material bumpers with low mold cost, easy structure forming and good comprehensive durability has become an important research task for automobile OEMs.
隐藏域元素占位
Automotive plastic shell interior parts mold design matters
Automotive plastic interior parts mold design is an important link in the production of automotive interior parts, and its design quality directly affects the quality of products and production efficiency. The following is the automotive plastic interior parts mold design need to pay attention to matters: 1. Material selection: The choice of mold material directly affects the life and production efficiency of the mold. In general, the mold material should have the characteristics of high strength, high hardness, high wear resistance and high corrosion resistance, while taking into account factors such as cost and processing difficulty.
隐藏域元素占位
What are the plastic surrounding the front and rear of the car
In the front and rear of the car, the plastic material is widely used. Specifically, the front and rear bumpers, fenders and some decorative parts may be made of plastic.
隐藏域元素占位
Contact E-mail:
Online Message
* Note: Leave your contact information to get a free product quote